BS350 : 2004 - Conversion factors for units
BS799-5 : 1987 - Oil burning equipment. Specification for oil storage tanks
BS870 : 1950 - Specification for external micrometers
BS887 : 1982 - Specification for precision vernier callipers
BS969 : 1982 - Specification for limits and tolerances on plain limit gauges
BS1387 : 1985 - Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
BS1710 : 1984 - Specification for identification of pipelines and services
BS4142 : 1997 - Method for rating industrial noise affecting mixed residential and industrial areas
BS4515-1 : 2004 - Specification for welding of steel pipelines on land and offshore. Carbon and carbon manganese steel pipelines
BS4994 : 1987 - Specification for design and construction of vessels and tanks in reinforced plastics
BS5228-1 : 1997 - Noise and vibration control on construction and open sites - Code of practice for basic information and procedures for noise and vibration control
BS5228-2 : 1997 - Noise and vibration control on construction and open sites - Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance
BS5228-4 : 1992 - Noise and vibration control on construction and open sites - Code of practice for noise and vibration control applicable to piling operations
BS5233 : 1986 - Glossary of terms used in metrology
BS5252F : 1976 - Colour matching fan
BS5276-2 : 2003 - Pressure vessel details (dimensions). Specification for saddle supports for horizontal cylindrical pressure vessels
BS5410-1 : 1997 - Code of practice for oil firing. Installations up to 45 kW output capacity for space heating and hot water supply purposes
BS5422 : 2001 - Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 degrees to +700 degrees celsius
BS5911-3 : 2002 - Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)
BS5911-4 : 2002 - Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete inspection chambers
BS5970 : 2001 - Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 degrees to +870 dgrees celsius
BS6376-1 : 1983 - Reagents for chemical analysis. Methods of test
BS6501-1 : 2004 - Metal hose assemblies. Guidance on the construction and use of corrugated hose assemblies
BS6739 : 1986 - Code of practice for instrumentation in process control systems: installation design and practice
BS7258-1 : 1994 - Laboratory fume cupboards. Specification for safety and performance
BS7258-3 : 1994 - Laboratory fume cupboards. Recommendations for selection, use and maintenance
BS7258-4 : 1994 - Laboratory fume cupboards. Method for determination of the containment value of a laboratory fume cupboard
BS7385-2 : 1993 - Evaluation and measurement for vibration in buildings. Guide to damage levels from groundborne vibration
BS7445-1 : 2003 - Description and measurement of environmental noise. Guide to quantities and procedures
BS7445-2 : 1991 - Description and measurement of environmental noise. Guide to the acquisition of data pertinent to land use
BS7445-3 : 1991 - Description and measurement of environmental noise. Guide to application to noise limits
BS7479 : 1991 - Method for salt spray corrosion tests in artificial atmospheres
BS7755-5.5 : 1999 - Soil quality. Physical methods. Laboratory methods
BS7666-4 : 2002 - Spatial data-sets for geographical referencing. Specification for recording public rights of way
BS8417 : 2003 - Preservation of timber. Recommendations
BS10175 : 2001 - Investigation of potentially contaminated sites. Code of practice
BS8298 : 1994 - Code of practice for design and installation of natural stone cladding and lining
BSEN571-1 : 1997 - Non-destructive testing. Penetrant testing. General principles
BSEN573-1 : 2004 - Aluminium and aluminium alloys. Chemical composition and form of wrought products. Numerical designation system
BSEN593 : 2004 - Industrial valves. Metallic butterfly valves
BSEN681-1 : 1996 - Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber
BSEN806-1 : 2000 - Specifications for installations inside buildings conveying water for human consumption - General
BSEN806-2 : 2005 - Specifications for installations inside buildings conveying water for human consumption - Design
BSEN837-1 : 1998 - Pressure gauges. Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing
BSEN982 : 1996 - Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
BSEN983 : 1996 - Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
BSEN1092-1 : 2002 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated - Steel flanges
BSEN1171 : 2002 - Industrial valves. Cast iron gate valves
BSEN1276 : 1997 - Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas. Test method and requirements (phase 2, step 1)
BSEN1330-7 : 2005 - Non-destructive testing. Terminology. Terms used in magnetic particle testing
BSEN1515-1 : 2000 - Flanges and their joints. Bolting - Selection of bolting
BSEN1759-1 : 2004 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated - Steel flanges, NPS 1/2 to 24
BSEN10025-3 : 2004 - Hot rolled products of non-alloy structural steels. Technical delivery conditions for long products
BSEN10216-5 : 2004 - Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
BSEN10217-4 : 2002 - Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy steel tubes with specified low temperature properties
BSEN10217-5 : 2002 - Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
BSEN10217-7 : 2005 - Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
BSEN10255 : 2004 - Non-alloy steel tubes suitable for welding or threading. Technical delivery conditions
BSEN12266-1 : 2003 - Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
BSEN12266-2 : 2002 - Industrial valves. Testing of valves. Tests, test procedures and acceptance criteria. Supplementary requirements
BSEN12285-1 : 2003 - Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
BSEN12285-2 : 2005 - Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
BSEN12469 : 2000 - Biotechnology. Performance criteria for microbiological safety cabinets
BSEN13480-1 : 2002 - Metallic industrial piping. General
BSEN14015 : 2004 - Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
BSEN14175-2 : 2003 - Fume cupboards. Safety and performance requirements
BSEN14614 : 2004 - Water quality. Guidance standard for assessing the hydromorphological features of rivers
BSEN14640 : 2005 - Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
BSEN20286-1 : 1993 - ISO system of limits and fits. ISO system of limits and fits. Bases of tolerances, deviations and fits
BSEN20286-2 : 1993 - ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
BSEN22768-1 : 1993 - General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications
BSEN22768-2 : 1993 - General tolerances. Geometrical tolerances for features without individual tolerance indications
BSEN45501 : 1994 - Specification for metrological aspects of non-automatic weighing instruments
BSEN50191 : 2001 - Erection and operation of electrical test equipment
BSEN50366 : 2003 - Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement
BSEN60044-1 : 1999 - Instrument transformers. Current transformers
BSEN60068-1 : 1995 - Environmental testing. General and guidance
BSEN60068-2.1 : 1993 - Environmental testing. Test methods. Tests A. Cold
BSEN60068-2.2 : 1993 - Environmental testing. Test methods. Tests B. Dry heat
BSEN60068-2.6 : 1996 - Environmental testing. Test methods. Test Fc. Vibration (sinusoidal)
BSEN60068-2-14 : 2000 - Environmental testing. Test methods. Test N. Change of temperature
BSEN60068-2-27 : 1993 - Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ea and guidance. Shock
BSEN60068-2-30 : 2005 - Environmental testing. Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
BSEN60068-2-32 : 1993 - Environmental testing. Test methods. Test Ed. Free fall
BSEN60085 : 2004 - Electrical insulation. Thermal classification
BSEN61010-1 : 2001 - Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
BSEN61340-5-2 : 2001 - Electrostatics. Protection of electronic devices from electrostatic phenomena. User guide
BSEN61672-1 : 2003 - Electroacoustics. Sound level meters. Specifications
BSENISO175 : 2001 - Plastics. Methods of test for the determination of the effects of immersion in liquid chamicals
BSENISO1101 : 2004 - Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BSENISO2819 : 1995 - Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for testing adhesion
BSENISO3059 : 2001 - Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
BSENISO3696 : 1995 - Water for analytical laboratory use. Specification and test methods
BSENISO3744 : 1995 - Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
BSENISO4126-1 : 2004 - Safety devices for protection against excessive pressure. Safety valves
BSENISO5167-1 : 2003 - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. General principles and requirements
BSENISO5167-2 : 2003 - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Orifice plates
BSENISO6579 : 2002 - Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Salmonella spp
BSENISO9934-1 : 2001 - Non-destructive testing. Magnetic particle testing. General principles
BSENISO9934-2 : 2002 - Non-destructive testing. Magnetic particle testing. Detection media
BSENISO9934-3 : 2002 - Non-destructive testing. Magnetic particle testing. Equipment
BSENISO10012 : 2003 - Measurement management systems. Requirements for measurement processes and measuring equipment
BSENISO10497 : 2004 - Testing of valves. Fire type-testing requirements
BSENISO17292 : 2004 - Metal ball valves for the petroleum, petrochemical and allied industries
BSENISO17511 : 2003 - In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
BSENISO/IEC17025 : 2005 - General requirements for the competence of testing and calibration laboratories
BSISO14507 : 2003 - Soil quality. Pretreatment of samples for determination of organic contaminants
DDISO/TS21749 : 2005 - Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
PD5500 : 2006 - Specification for unfired fusion welded pressure vessels
PD6461-3 : 1995 - General metrology. Guide to the expression of uncertainty in measurement (GUM)
